Table of Contents
Advertisement
Chapter 2 Convenient Features
1.2.3 Security
If you move the cursor to Security, the Security menu appears. For the menu that has
cursor to it and then press the <Enter> key to show its submenus. Then configure the settings.
Select Administrator Password or User Password, and then press the <Enter> key to display the screen
where you can register/change the password.
For details about the options, see the table below.
Option
Password Configuration
Administrator Password
User Password
Security Configuration
•
Tips
User Password cannot be set without setting Administrator Password
•
Do not set any password before installing OS.
•
If you have forgotten any password, contact the store where you purchased the
product or your maintenance service company. If you want to clear password, refer to
Chapter 1 (7. Resetting and Clearing Server).
Parameter
–
Up to 20 alphanumeric
characters
Up to 20 alphanumeric
characters
–
Express5800/E120d-M Maintenance Guide
Descriptions
–
When the <Enter> key is pressed, the password entry
screen to set administrative right is displayed.
This password can be used to access all SETUP menus.
Password can be set only when SETUP is started by
administrative right. If no password is set, SETUP starts
with administrative right.
When the <Enter> key is pressed, the password entry
screen to set user right is displayed. With this password,
access to SETUP menus is limited. The user password
can be set when SETUP is started by administrative right
or user right.
–
1. System BIOS
on the left, move the
65
Advertisement
Table of Contents
