Scale The Image - RGBlink GX4 Quick Start Manual

Hide thumbs Also See for GX4:

Table of Contents

Push the [MENU] button to go into the main menu, turn the knob and select <OUTPUT>, push the knob to

confirm, turn the knob to select <SCREEN >, push the knob and goes into the SCREEN PARAMETERS menus as

following:

H SIZE--Horizontal pixels, turn the knob or use the digital button to input 1408.

V SIZE--Vertical pixels, turn the knob or use the digital button to input 832.

H POS--Horizontal position, default 0, set the value as the way of H SIZE and V SIZE.

V POS--Vertical position, default 0, set the value as the way of H SIZE and V SIZE.

MODE-- Mode option, select SCREEN SIZE.

SCREEN FOLLOW SCALE--User can enable or disable this function. When choose "ON", the size of the screen will

change according to scale setting

RESET: If image quality distorts by improper operation, it can be recover by reset.

Scale the Image

Push the [SCALE] button, and enter the scale function menus, user can adjust the following items by knob or

number buttons.

H SIZE: Width setting.

V SIZE: Height setting.

H/V SIZE: Width and height equal proportion scale setting.

H POS: Horizontal phase setting.

V POS: Vertical phase setting.

RESET: If image quality distorts by improper operation, it can be recover by reset.

Zoom function: the default function of the system is zoom . The zoom control will be selected in the zoom

menu,Confirm by lightly touching the knob.

Adjustment function: the image width, height, width/height, horizontal position and vertical can be adjusted by

means of a light knob or directly input digital mode

Position equivalent, adjust to preset value, and then touch the knob to determine.

11 / 20

Ph: +86 592 5771197 |

support@rgblink.com

www.rgblink.com

Table of Contents