Load Preset - RGBlink GX4 Quick Start Manual

Load Preset

GX4 provides 16 positions for saving or recording parameters. To recall saved settings:
1. Push the [LOAD/6] button, the button light is on, and enable the LOAD function:
2. Turn the rotary knob, and select the position that will load, push the knob to confirm.
3. Push the [LOAD/6] button again, the button light is off, and disable the LOAD function.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
RECALL SAVE
->SAVE 1
Button on is ready for recall
Button flashes means just recall
support@rgblink.com | www.rgblink.com
15 / 20