When it is done, a window will pop up showing "Serial port set" and the Device Type and SN (serial number) can be identified.
6.Click Screen File to load the LED configuration file saved previously.
Select Manufacturer from 1 to 15 and File Index from 1 to 16. Type in the File Name according to real manufacturer and the LED
screen specification. Click Browse to open up Local file to select the Led configuration file stored before and click Set to confirm.
7.When it is done, a window showing Set Success will pop up.
© Xiamen RGBlink Science & Technology Co., Ltd.
17 / 20
Ph: +86 592 5771197 |
support@rgblink.com
|
www.rgblink.com