Load Led Configuration File - RGBlink GX4 Quick Start Manual

Load LED Configuration File

For GX4 installed with Subito Quatro Sender Module, user can upload LED manufacturer' bin file to set the LED screen parameter.
1.Prepare LED configuration file provided by the manufacturer and store it in somewhere easy to find on your computer or USB
disk.
2.Download and install XTOOL V1.0.1.3. Download XTOOL from RGBLink www.rgblink.com/support#downloads
3.Connect GX4 and computer with the USB cable (USB A-B cable) from In The Box.
4.Open up XTOOL
If you find it in Chinese, switch the language by clicking this
5.Set Connection
Click connection icon , select Serial Comm and Confirm.
© Xiamen RGBlink Science & Technology Co., Ltd.
16 / 20
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com