Electrical Safety; Pressure Safety; Hazardous Materials (Weee, Rohs3 & Reach); Calibration (Factory Validation) - Michell Instruments Optidew User Manual

Optidew User's Manual

Electrical Safety

Ensure electrical safety is complied with by following the directions provided here and observing
all local operation & installation requirements at the intended location of use.
This product is completely safe when using any options and accessories supplied by the
manufacturer of this product for use with it. Refer to Section 2 (Installation) of this manual for
further details.

Pressure Safety

For this product to operate satisfactorily, pressurized gas must be connected to it. Observe all
the information contained within this manual and all local operation & installation requirements
at the intended location of use. Refer to Section 2 (Installation) of this manual for further details.
Hazardous Materials (WEEE, RoHS3 & REACH)
This product does not contain or release any prohibited chemicals listed on the SVHC (Substances of
Very High Concern) Candidate List. During the intended normal operation of this product it is not
possible for the user to come into contact with any hazardous materials. This product is designed to
be recyclable except where indicated, see relevant sections in this manual for further details.

Calibration (Factory Validation)

Prior to shipment, the instrument undergoes stringent factory calibration that is traceable to
national standards. Due to the inherent stability of the instrument, regular factory calibration is
not required, however recalibration is recommended to maintain measurement traceability.
Michell Instruments can provide a fully traceable factory calibration service for the instrument
and it is recommended that this is considered at intervals of every year of the analyzer's life.
Please contact your local Michell Instruments' office or representative for further details
(www.michell.com).

Repair and Maintenance

Apart from user-replaceable components required for routine operational maintenance described
above, the instrument must only be maintained either by the manufacturer or an accredited
service agent. Refer to www.michell.com for details of Michell Instruments' worldwide offices
contact information.
Michell Instruments ix