Table of Contents
Advertisement
myC-4
4.82 Tools :
- Cross shaped screwdriver
- Soldering iron
- Solder wick
4.83 Preliminary operation
1. Remove the battery pack (
2. Remove the back cover (
3. Remove the front cover of the lower slide (
4. Remove the back cover of the upper slide (
5. Remove the display module
4.84 Removal procedure :
1. Unsolder the loudspeaker (2) from the display module (1)
2. Remove the loudspeaker (2)
4.85 Placement procedure :
1. Flux the place of the loudspeaker (2) and solder on the display module (1), respecting the wiring sense
4.86 Further operations :
5. Replace the display module (
6. Replace the back cover of the upper slide (
7. Replace the front cover of the lower slide (
8. Replace the back cover (
9. Replace the battery pack (
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0023 – Index B - February 21, 2005
REMOVING / REPLACING THE LOUDSPEAKER
Proc sheet 0
01).
Proc sheet 1
02)
Proc sheet 1
Proc sheet 1
(Proc sheet 1 13
)
Proc sheet 1
13)
Proc sheet 1
Proc sheet 1
Proc sheet 1
02)
Proc sheet 0
01).
Proc Sheet 1 14
06).
07).
07).
06).
1/2
Page 5-40
Advertisement
Table of Contents
