Table of Contents
Advertisement
myC-4
4.37 Tools :
- Cross shaped screwdriver
- Tweezers
4.38 Preliminary operation :
1. Remove the battery pack (
2. Remove the back cover (
4.39 Removal procedure :
1. Push on the two stop pins by means of tweezers, to liberate the battery lock (1).
2. Remove the battery lock (1) and battery lock spring.
4.40 Placement procedure :
1. Position the battery lock spring in its housing
2. Position the battery lock in its housing and push it until locked position
4.41 Further operations :
1. Replace the back cover (
2. Replace the battery pack (
3. Carry out the radio test
Ref. SCT U38 SSC DTS 0023 – Index B - February 21, 2005
REMOVING / REPLACING THE BATTERY LOCK
Proc sheet 0
01).
Proc sheet 1
02).
Proc sheet 1
02).
Proc sheet 0
01).
(Test Sheet
04).
Proc Sheet 1 05
1/2
Page 5-22
Advertisement
Table of Contents
