Table of Contents
Advertisement
myC-4
4.62 Tools :
- Cross shaped screwdriver
- Gloves
- Metal dome Jig
Tweezers
4.63 Preliminary operation
This procedure must be performed by a technician with gloves.
1. Remove the battery pack (
2. Remove the back cover (
3. Remove the front cover of the lower slide (
4. Remove the back cover of the upper slide (
5. Remove the front cover (
4.64 Removal procedure :
1. Remove the metal dome (2) of the equipped electronic board (1)
4.65 Placement procedure :
Warning : The metal dome is not reusable, it must be necessarily replaced by a new metal dome,
unless the board is swapped and sent as level 3
1. Replace the new metal dome (2) on the equipped electronic board (1), using the metal dome jig.
4.66 Further operations :
1. Replace the front cover (
2. Replace the back cover of the upper slide (
3. Replace the front cover of the lower slide (
4. Replace the back cover (
5. Replace the battery pack (
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0023 – Index B - February 21, 2005
REMOVING / REPLACING THE METAL DOME
OF THE NAVIGATOR KEYPAD
Proc sheet 0
01).
Proc sheet 1
02)
Proc sheet 1
Proc sheet 1
Proc sheet 1
09).
Proc sheet 1
09)
Proc sheet 1
Proc sheet 1
Proc sheet 1
02)
Proc sheet 0
01).
06).
07).
07).
06).
Proc Sheet 1 10
1/2
Page 5-32
Advertisement
Table of Contents
