Table of Contents
Advertisement
myC-4
Test description
This test tests myC-4 phones during a call.
Required tools
− A Wavetek
− A RF coupler
− A myC-4 calibration tool
−
Test procedure
1. Position the calibration tool first on the RF coupler to calibrate it
2.
Position the myC-4 module on the RF coupler
3.
Switch the Wavetek on and press on "AUTOTEST".
4.
Choose the corresponding program using the "UP" and "DOWN" arrows.
Mobile :myC-4
Frequency range : GSM, DCS or GSM/DCS,
Coupling type : ANTENNA.
5.
Press on "ENTER" and wait until the end of the calibration.
6.
Follow the instructions shown on the Wavetek.
Ref. SCT U38 SSC DTS 0023 – Index B - February 21, 2005
"HOTLINE" MENU
Test Sheet 04
1/1
Page 4-44
Advertisement
Table of Contents
