Sagem myC-4 Site Technical Documentation page 71

myC-4
4.27 Tools :
- Cross shaped screwdriver
4.28 Preliminary operation
1. Remove the battery pack (
2. Remove the back cover (
4.29 Removal procedure :
1. Remove the equipped electronic board (1)
4.30 Placement procedure:
1. Position the equipped electronic (1) board in its housing.
4.31 Further operations:
1. Replace the back cover (
2. Replace the battery pack (
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0023 – Index B - February 21, 2005
REMOVING / REPLACING THE ELECTRONIC
BOARD
Proc sheet 0 01).
Proc sheet 1 02).
Proc sheet 1 02).
Proc sheet 0 01).
Proc Sheet 1 03
1/2
Page 5-18