Table of Contents
Advertisement
myC-4
the mobile is not recognized
when the following message
is displayed "Reading
informations from the mobile
failed...."
Ref. SCT U38 SSC DTS 0023 – Index B - February 21, 2005
TEST AND CHECK BY SMT
SWAP : Electronic board Configuration
No
perform the step
3b
perform the step
3c
plug the connector
of downloading kit
into the defective
board
perform the step 1
by placing a keypad on the
turn on the
defective board
perform the step 2
mobile
recognized
Yes
perform the step
3a
perform the step 4
perform the step 5
perform the step 6
perform the step 7
Test Sheet 01
3/9
defective board and by
pressing the start key
the mobile is recognized
when the IMEI number,
Reference and Type of
mobile are displayed
Page 4-34
Advertisement
Table of Contents
