Sagem myC-4 Site Technical Documentation page 67

REMOVING / REPLACING ELASTOMER Proc Sheet 1 01
NUMBER KEYPAD
myC-4 1/2
4.17 Tools :
- Cross shaped screwdriver
4.18 Preliminary operation
1. Remove the battery pack ( Proc sheet 0 01).
4.19 Removal procedure :
1. On the back cover (1), unscrew the four attachment screws (2) .
2. Press the two stop pins (3) to liberate the back cover (1)
3. Lift delicately the back cover (1) up beginning by the back side
4. Remove the elastomer number keypad (4)
4.20 Placement procedure :
1. Clean the elastomer number keypad (4) with compressed air .
2. Push down back of rear cover and screw the four attachment screws (2) with 0,1 N.m torque.
4.21 Further operations :
1. Replace the battery pack ( Proc sheet 0 01)
Ref. SCT U38 SSC DTS 0023 – Index B - February 21, 2005 Page 5-14