Start The Operation; Operation Modes - YILMAZ PCC 6505 Manual

7.2.4 Confirm the selection.
7.2.5 The selected working list will appear on the screen.
7.3 STARTING THE OPERATION
7.3.1 Place profiles on feeding conveyor according to the listed operations.
7.3.2 Press on the green button on feeding conveyor to move the conveyor forward.
7.3.3 Continue on putting the profiles together.
7.3.4 When start button is pressed, operation begins

7.4 OPERATION MODES

7.4.1 Operation with sensor

In this operation mode, it is not needed to know the length of profile. Sensor finds the profile automatically, measures its
length and profile moves to the processing unit.

To activate this operation mode,
o Open the main screen.
o Press on
button to display the screen in which selection will be done.
o Press on
mode is active, the color of the button turns into green as in figure
7.4.2 Operation without sensor

In this operation mode, the length of the profile is either entered on the screen or read from database. According to the
length, robot directly goes to the end of the profile, holds it and moves to processing unit. By doing so, it is aimed to reduce
search time when same lengths of profiles are processed.

While working in this operation mode, length of profiles should be entered correctly.

To activate this operation mode
o Open the main screen.
o Press on
button to display the screen in which selection will be done.
o Press on
operation with sensor

To enter the profile information on the screen
o Open the main screen.
o Press on
button to display the screen in which dimension of profiles is entered.
o Enter profile height in
automatically when working with the list).
o Enter profile width in
automatically when working with the list).
is passive, the color
.
button to activate the operation with sensor. When this operation
button to inactivate the operation with sensor mode. When this
of the button turns into red as
section (This information displays
section (This information displays
.
in figure
41