Defining The Reference Position Of Machine - YILMAZ PCC 6505 Manual

o Enter profile length in
automatically when working with the list).
o Provide the clamping position of the profile in
the robot knows that it holds the profile either in horizontal or vertical position. If robot holds the profile in horizontal direction,
enter "0". When the robot holds the profile in vertical direction, enter "1" (This information displays automatically when
working with the list).
o The activation of the side pistons, during the operation of machine, is defined by entering "1" or "0" in
with the list).
7.4.3 Entering the Features of Saw
 Enter the diameter of saw in
 Enter the width of saw in
 In case balance of the saw is available, enter the value in
section.
 Enter
the distance
waits away from the profile after cutting operation.
7.5

DEFINING THE REFERENCE POSITION OF MACHINE

 Open the main screen.
 Press on
button to open the screen at which length will be entered.
 Press on
button and enter the password (5678).
 Press on
positions of machine are identified, the red background turns into green.
 ress on
finishes identifying the reference position in RX- axis is identified, the red background turns into green.
 Press on
finishes identifying the reference position in RY- axis is identified, the red background turns into green.
 Press on
finishes identifying the reference position in RZ- axis is identified, the red background turns into green.
between profile and
section. In the meantime, this value defines the distance at which saw
button to identify all reference positions in all axes simultaneously. If reference
button to identify only the reference position of processing unit on RX- axis. If robot
button to identify only the reference position of processing unit on RY- axis. If robot
button to identify only the reference position of processing unit on RZ- axis. If robot
section (This information displays automatically when working
saw, while saw is
section (This information displays
section.
section.
waiting upon the
section so that
profile, in
42