YILMAZ PCC 6505 Manual page 55

elevated (P21) !..
A29 Width measuring piston not opened
(P22) !..
A34 Saw Z Servo Fault !..
A35 Saw Servo Fault !..
A36 Robot X Fault !..
A37 Robot Y Fault !..
A38 Robot Z Fault !..
A39 Stopped as profile not loaded !..
A40 Data not downloaded from database
!..
A41 Outlet conveyor pulley not elevated
!..
A42 Claw not turned to vertical position
(P15) !..
Claw not turned
position (P15) !..
A43

If the piston is open, sensor may not
detect the piston.


Piston may not open completely.

If the piston is open, sensor may not
detect the piston.
Servo may produce error due to any
kind of overload.
Servo may produce error due to any
kind of overload.
Servo may produce error due to any
kind of overload.
Servo may produce error due to any
kind of overload.
Servo may produce error due to any
kind of overload.
The process in the cutting list is
completed.
The process in the cutting list is
completed.


Piston
completely

If the piston is open, sensor may not
detect the piston


Piston may not turn into vertical
position completely
If the piston is open, sensor may not
detect the piston

Piston may not turn into horizontal
position completely.
to horizontal

If the piston is open, sensor may not
detect the piston.


Claw piston
completely.
may not be elevated
may not open
Check valve of the piston or sensor.
Reset the alarm on the screen.
Reset the alarm on the screen.
Reset the alarm on the screen.
Reset the alarm on the screen.
Reset the alarm on the screen.
Continue processing after loading a
new working list.
Continue processing after loading a
new working list.
Check valve of the piston or sensor.
Check valve of the piston or sensor.
Check valve of the piston or sensor.
55