Cutting List Information - YILMAZ PCC 6505 Manual

A44 Claw not opened (P16) !..
A45 Profile not sash but frame !..
A46 Profile not frame but sash !..
A54 Saw thermal switch off
A55 Feeding conveyor thermal switch off
A56 Outlet conveyor thermal switch off
A57 Material at outlet

9. CUTTING LIST INFORMATION

Cutting list of the machine shall have *.mdb extension. Detailed explanations of the items that should be entered in cutting list
are given below.
PRG_NO (Column 1) : Program number should be in integer format of maximum 4 digits. (** The number of program is
entered in this column.)
CUSTOMER_ CODE (Column 2) :
code, it can be entered in this column.)
CUSTOMER_ NAME (Column 3) :
entered in this column.)
STOCK_ CODE (Column 4) :
entered in this column. If the stock code of profile is longer than 16 characters, code should be shortened by deleting
either the initial or final letters. On the other hand, if the stock code is shorter than 16 characters, code should be
completed to 16 characters by adding zero (0) either to start or end of text. Stock code can be obtained from producer.
)
STOCK_ NAME (Column 5) :
entered in this column.)
ORDER_NO (Column 6) :
in this column.)
EXPLANATION1 (Column 7) :
column is shown as barcode. Required information is stored in each character.)
EXPLANATION2 (Column
column can be of any kind.)

If the piston is open, sensor may not
detect the piston
The entered type of profile may be
wrong or sensor, that differentiates
the type of profiles, is not detecting.
The entered type of profile may be
wrong or sensor, that differentiates
the type of profiles, is not detecting.
Thermal switch in panel may be
turned off.
Thermal switch in panel may be
turned off.
Thermal switch in panel may be
turned off.
There is material at the outlet or
sensor assumes.
It should be in text format of maximum 12 characters. (If customer has a commercial
It should be in text format of maximum 24 characters. (The name of the customer is
It should be in text format of maximum 16 characters. (** The stock code of the profile is
It should be in text format of maximum 12 characters. (** The stock name of the profile is
It should be in text format of maximum 6 characters. (**The number of purchase order is entered
It should be in text format of maximum 10 characters. (The information entered in this
8) : It should be in text format of maximum 24 characters. (The information entered in this
Check valve of the piston or sensor.
Check sensor or profile.
Check sensor or profile.
Check switch and if it is off, set.
Check switch and if it is off, set.
Check switch and if it is off, set.
If there is material, remove it. In case
there is no material, check the sensor.
56