Transport Of The Machine - YILMAZ PCC 6505 Manual

CHIP CONVEYOR
OUTLET CONVEYOR
NUMERICAL CONTROL
1. Numerical Control Hardware
Each numerical control hardware includes the below given components:

Windows 7 Professional

Intel® Atom™ CPU D2500

1.87 GHz Dual core

2 GB Ram

32 – bit Operation System

RS 232 Serial and Parallel ports

5 USB port

15'' Color Touchscreen

1 Ethernet port for Network connection

Touch Input

32 Gb SSD Hard Disk
2. Numerical Control Software
Numerical Control Software provides the control of the following functions.

Displaying position of axes on screen, manual control of axes, automatic lubrication, profile support, machine safety
door, etc.

Tool Table: It is used for storing tool parameters and can also be utilized for offset.

CNC Set-up Tables: Machine parameters which allows the maintenance (Axial length, origins, offset values

4. TRANSPORT OF THE MACHINE

4.1. The transport should be done by qualified personnel only.
4.2. The machine should be transported by lifting with proper equipment (not touching the ground during the transport).
4.3. Unless customer requests the contrary, the machine will be delivered with wooden packaging.
4.4. Movable parts on the machine should be fixed before carrying out the transport.
4.5. The machine size and weight measurements, given the technical specification sheet.
4.6. In order to get more stability when hanging the machine in case of move it, hang it from bottom insofar. Move the
machine without shaking it in slow movements. Be sure to take care of persons in dangerous places.
FEEDING CONVEYOR
(fixing plate)
39