Operation; Preparation - YILMAZ CRM 301S Manual

6.7 Do not work on the machine by removing the protective parts
The safety data have been defined above. In order to prevent physical damage or damage to the
equipment, please read the safety information carefully and keep the manual always in an easy
accessible place.

7. OPERATION

7.1 Preparation

7.1.1 Degrease and dry the machine table. Especially ensure that the holding grips and handles are clean and dry
7.1.2 Clean all surfaces of the machine from chip and foreign particles. Use eye glasses for protection.
7.1.3 Copy router machines can process on products manufactured from
rigid plastic and aluminum materials that don't include iron alloy.
7.1.4 Control whether cutting tools (FIGURE 2 NO.78) are inserted safely to
their places.
7.1.5 Control cutting tools against corrosion, distortion and fractions. If
cutting tools are damaged, change them.
7.1.6 Cutting tool must process on the part after machine is operated and
cycled.
7.1.7 Do not process the profile before clamping the work piece
properly.
46