Manual Lubrication Using The Screen Buttons; Setting The Robot Speed - YILMAZ PCC 6505 Manual

o While pressing on
o The section
axis
o When the required position (1 and 6950 mm) of robot arm is entered in
button is pressed, robot arm moves directly to the entered position manually
Notice: Manual operation speed of all units is displayed in
7.9 MANUEL OPERATION OF WASTE CONVEYOR
 Open the main screen.
 Press on
button to open manual operation screen.
By pressing on

7.10 MANUAL LUBRICATION USING THE SCREEN BUTTONS

 Open the main screen.
 Press on
button to open manual operation screen.
 By pressing on
automatic lubrication operation at any time.

7.11 SETTING the ROBOT SPEED

 Open the main screen.
 Press on
button and enter the required password (5678).
 Press on
In the pop up window;
 Enter profile processing speed of robot in
is 1800 mm/s.
 Enter profile search speed of robot in
speed is 2000 mm/s.
button, robot arm moves upward within the allowable limits
, between and
button, waste conveyor button is operated manually
button, lubrication is performed for once. This operation is manually triggering the
button.
buttons, displays position of the robot about its "Z"
.
and
. The maximum speed
. The maximum
51