3. Replace the glass insert in the kettle by holding the glass insert with the handles
of the glass insert lid ring. The kettle will heat the water up to the set temperature
and carry on executing the running program as normal.
COOKING MEALS WITHIN THE KETTLE – "BOIL" AND "CUSTOM"
Various meals can be cooked within the tea kettle (see: 'Recipes'). For this, it is best to use
the cooking programs "Boil" or "Custom". When putting your own ideas into practice,
please keep in mind that the temperature within the glass insert will be slightly below the
set temperature within the kettle. The higher the set temperature, the higher the difference
will be. Additionally, the difference will depend on the amount of water within the kettle
and the amount of food within the glass insert. To keep the difference as low as possible,
you should always use the glass lid and the stainless steel lid of the glass insert lid set.
Note
You should adapt the filling level in the kettle to the amount of food you wish to
cook/heat in the glass insert. With only a small amount of food in the glass insert,
you should reduce the maximum amount of water in the kettle to 700 - 800 ml.
WARNING:
lid are undamaged. There may be no cracks or chipped edges. When taking the
glass insert out of the kettle after cooking, please keep in mind that the glass insert
could be hot and hot condensate and steam could escape, depending on the set
temperature. If required, use pot holders or rubber gloves to protect your hands.
Do not place the hot glass insert on any surfaces sensitive to heat and moisture.
Note
The cooking program "Custom" will heat the water within the kettle up to the indi-
vidually adjustable temperature from 40°C to 100°C. With the "Boil" program
the temperature is set to 100°C automatically,and the water will be heated up to
the boil first. Thereafter the selected cooking time ("Steeping") will start and the
appliance will keep the water at the set temperature. However, the maximum tem-
perature during cooking time is limited to 90 - 95°C to avoid too high loss of water
due to evaporation. After the cooking time elapsed, a signal sounds and the keep
warm function ("Warm") is started, running for up to 60 minutes. With the keep
warm function, the temperature in the kettle is limited to 80°C at the maximum.
Tip: If you wish to use special temperature settings or elongated cooking times, use
the "Custom" program (see: 'Properties of Your Tea & More/Cooking Programs").
68
Before each use, always ensure that the glass insert and glass
Need help?
Do you have a question about the Design Tea & More Advanced and is the answer not in the manual?