Connecting The 4G Lte Cable (With No Poe Spd) - Huawei SmartACU2000B Series User Manual

SmartACU2000B smart array controller
User Manual (with PID modules, 800 V AC)
Figure 5-14 Connecting the CPE network cable
----End

5.7 Connecting the 4G LTE Cable (with no POE SPD)

Prerequisites
The network cable from the SmartLogger to the POE module and the power cable of the POE
module have been factory-installed. You only have to connect the other end of each
factory-installed cable to the POE module.
Procedure
Step 1 Connect the factory-installed network cable to the DATA port on the POE module.
Step 2 Connect the factory-installed power cable to the POE module.
Issue 05 (2019-01-20) Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
66