Connecting The 4G Lte Cable (With The Poe Spd) - Huawei SmartACU2000B Series User Manual

SmartACU2000B smart array controller
User Manual (with PID modules, 800 V AC)
Figure 5-11 Connecting optical cables
Step 6 Check that the cables are connected correctly and securely. Then reinstall the optical cable
fastener and ATB cover.
----End

5.6 Connecting the 4G LTE Cable (with the POE SPD)

Prerequisites
The network cable from the POE module to the POE SPD has been shipped with the POE
SPD.
The network cable from the SmartLogger to the POE module and the power cable of the POE
module have been factory-installed. You only have to connect the other end of each
factory-installed cable to the POE module.
Procedure
Step 1 Connect the POE port on the POE module to the PROTECT port on the POE SPD using the
network cable delivered with the POE SPD.
Issue 05 (2019-01-20) Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
63