SmartACU2000B smart array controller
User Manual (with PID modules, 800 V AC)
Figure 7-5 Removing a faulty fuse
Step 3 Install the new fuse and close the knife fuse switch box.
----End
7.3.5 Replacing the Single-Phase Input Switch
Prerequisites
Procedure
Step 1 Disconnect cables from the faulty single-phase input switch, and label the cables.
Step 2 Remove the faulty single-phase input switch.
Figure 7-6 Removing a faulty single-phase input switch
Step 3 Install the new single-phase input switch.
Step 4 Connect the cables to the new single-phase input switch based on the cable labels.
----End
Issue 05 (2019-01-20)
The single-phase input switch is faulty.
A spare single-phase input switch of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
7 System Maintenance
93