Purpose Of This Manual - Analog Devices ADSP-BF518F EZ-Board Manual

• LEDs
• Five LEDs: one board reset (red), three general-purpose
(amber), one configurable ethernet LEDs (amber) and one
power (green)
• Push buttons
• Three push buttons: one reset, two programmable flags with
debounce logic
• Expansion interface II
• Next generation of the expansion interface design, provides
access to most of the ADSP-BF518F processor signals
• Land grid array
• Easy probing of all port pins and most EBIU signals
• Other features
• JTAG ICE 14-pin header
• Blackfin power measurement jumpers
For information about the hardware components of the EZ-Board, refer
to Chapter 2, "ADSP-BF518F EZ-Board Hardware

Purpose of This Manual

The ADSP-BF518F EZ-Board Evaluation System Manual provides instruc-
tions for installing the product hardware (board). The text describes
operation and configuration of the board components and provides guide-
lines for running your own code on the ADSP-BF518F EZ-Board.
Finally, a schematic and a bill of materials are provided for reference.
ADSP-BF518F EZ-Board Evaluation System Manual
Preface
Reference".
xv