5.
DMX input: DMX512 link, use 3-pin XLR cable to link the unit and DMX controller.
3.2 Main Function
To select any of the given functions, press the MENU button up to when the required selection as
shown on the display. Select the function by the ENTER button and the display will blink. Use the
DOWN/UP button to change the mode. Once the required mode has been selected, press the
ENTER button to setup, to go back to the functions without any change press the MENU button
again. Press and hold the MENU button for about one second or wait for one minute to exit the
menu mode.
The main functions are shown below:
5B