ACME Color Par 36 User Manual page 11

（
Manual Setting
To select the
DOWN/UP button to select the
(strobe) mode. Once the mode has been selected, press the ENTER button to setup, use
UP/DOWN button to adjust the value 0-255, to go back to the functions without any changes press
the MENU button again. Hold and press the MENU button for one second or wait for one minute
to exit the menu mode.
（ ）
Test
To select the , press the ENTER button to show the TEST on the display and the unit will run
a self-test . To go back to the functions without any changes press the MENU button again. Hold
and press the MENU button for one second or wait for one minute to exit the menu mode.
（
Fixture Hours
To select the , press the ENTER button to show the FIXTURE HOURS on the display and the
display will show the number of working hours of the unit . To go back to the functions without
any changes press the MENU button again. Hold and press the MENU button for one second or
wait for one minute to exit the menu mode.
（
Software Version
To select the , press the ENTER button to show the SOFTWARE VERSION on the display and
the display will show the version of software of the unit . To go back to the functions without any
changes press the MENU button again. Hold and press the MENU button for one second or wait
for one minute to exit the menu mode.
）
, press the ENTER button to show the DIMMER SPEED on the display. Use the
（red）,
）
）
（green）
10B
(blue) (dimmer) or