Main Function - ACME 04XOZONE User Manual

2. Button:
MENU
UP
DOWN
ENTER
3. FIRMWARE UPGRADE: Used to upgrade fixture's firmware
4. DMX OUT:
For DMX512 link, use 5-pin XLR cable to link the next units (3-pin IP XLR cable is optional)
5. DMX IN:
For DMX512 link, use 5-pin XLR cable to link the unit and DMX controller (3-pin IP XLR is optional)
6. FUSE(T 15A):
To protect the unit from over-voltage or short circuit
7. POWER IN:
To connect to supply power
8. POWER OUT:
To connect to the next fixture

3.2 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until
the required function is shown on the monitor. Select the function by pressing the ENTER button.
Use the UP/DOWN button to choose the submenu, press the ENTER button to store and
automatically return to the last menu. Press the MENU button or let the unit idle 30 seconds to exit
menu mode.
The screen will be automatically locked if there is no operation for a long time, and can be unlocked
by long-pressing the MENU button.
The main functions are shown below:
To enter into move backward or leave the menu
To go backward to move up in the menu
To go forward to move down in the menu
To perform the desired functions
6H