Main Function - ACME XA-400 SPOT PRO User Manual

ENTER To confirm the selected functions
3. Function Display: Used to show the various menus and the selected function;
4. Fireware Upgrade
5. DMX IN/OUT: DMX 512 link, use XLR cable to link the unit and DMX controller;
6. FUSE (T6.3Amp): Protect the unit from damage of the overcurrent;
7. POWER IN: Connect to power supply.

3.2 Main Function

To select any of the given functions, press the MENU button up to when the required one is
showing on the display. Select the function by the ENTER button and the display will blink. Use the
DOWN and UP button to change the mode. Once the required mode has been selected, press the
ENTER button to setup, to go back to the functions without any change press the MENU button
again. Hold and press the MENU button about one second or wait for one minute to exit the menu
mode.
The main functions are showing below:
5B