Main Function - ACME Ellipsoidal 10 DMX User Manual

At first, please push the screws on both side of the fixture by hand as the
arrow, and move away the focus lens silently by hand as the arrow.
5
6
Then insert the focus lens as the arrow silently, and insert the screws in
place by hand as the arrow, and fasten the lens.

Main Function

To select any of the given functions, press the MENU button up to when
the required one is showing on the display. Select the function by ENTER
button and the display will blink. Use the DOWN/UP button to change the
mode. Once the required mode has been selected, press the ENTER button
to setup, to go back to the functions without any change press the MENU
button again. Hold and press the MENU button about one second or wait
for one minute to exit the menu mode.
The main functions are showing below:
3F