ACME Color Par 36 User Manual page 10

DOWN/UP button to select the
mode has been selected, press the ENTER button to setup, to go back to the functions without any
changes press the MENU button again. Hold and press the MENU button for one second or wait
for one minute to exit the menu mode.
（
LED Display
To select the , press the ENTER button to show the LED DISPLAY on the display. Use the
DOWN/UP button to select the
the mode has been selected, press the ENTER button to setup, to go back to the functions without
any changes press the MENU button again. Hold and press the MENU button for one second or
wait for one minute to exit the menu mode.
（ ）
Display
To select the , press the ENTER button to show the DISPLAY on the display. Use the
DOWN/UP button to select the
functions without any changes press the MENU button again. Hold and press the MENU button for
one second or wait for one minute to exit the menu mode:
Display normal mode for the fixture putting on the floor;
Display inversion mode for the fixture fixing under ceiling.
（
White Balance
To select the
DOWN/UP button to select the
mode has been selected, press the ENTER button to setup, use UP/DOWN button to adjust the
value 125-255, to go back to the functions without any changes press the MENU button again.
Hold and press the MENU button for one second or wait for one minute to exit the menu mode.
(master slave mode) or
）
(LED display on) or
(normal) or
）
, press the ENTER button to show the DIMMER SPEED on the display. Use the
（red）,
(display inversion). To go back to the
（green）or
9B
(blackout mode). Once the
(LED display off) mode. Once
(blue) mode.Once the