ACME Color Par 36 User Manual page 8

（DMX 512 Address）
To select the , press the ENTER button to show the DMX ADDRESS on the display. Use the
DOWN/UP button to adjust the address from 1 to 512. Once the address has been selected, press
the ENTER button to setup, to go back to the functions without any changes press the MENU
button again. Hold and press the MENU button for one second or wait for one minute to exit the
menu mode.
（DMX Channel Mode）
To select the , press the ENTER button to show the DMX CHANNEL MODE on the display.
Use the DOWN/UP button to select the 3 CH, 5 CH or 6 CH mode. Once the mode has been
selected, press the ENTER button to setup, to go back to the functions without any changes press
the MENU button again. Hold and press the MENU button for one second or wait for one minute
to exit the menu mode.
（
Show Mode
To select the
DOWN/UP button to select the
(Show 4) （show 5） ，
mode, press ENTER to confirm, use UP/DOWN button to select 1-10 or adjust fade speed (speed 1:
slow, speed 2: medium, speed 3: fast). Once the mode has been selected, press the ENTER button
to setup, to go back to the functions without any changes press the MENU button again. Hold and
press the MENU button for one second or wait for one minute to exit the menu mode.
（
Slave Mode
To select the
DOWN/UP button to select the
）
, press the ENTER button to show the SHOW MODE on the display. Use the
(Show 1),
(color) or
）
, press the ENTER button to show the SLAVE MODE on the display. Use the
（master） ,
(Show 2),
(fade) mode， when you select color or fade
(normal) or
7B
(Show 3) ,
(2 light show) mode.