Figure 44. Installing the mini PERC riser board
Next steps
1.
Install the mini PERC module.
2.
Install the PCIe card module.
3.
Install the air shroud.
4.
Install the sled.
5. Follow the procedure listed in
.
System memory
System memory guidelines
The PowerEdge system supports DDR4 registered DIMMs (RDIMMs) and Load Reduced DIMMs (LRDIMMs). System memory
holds the instructions that are executed by the processor.
Your system contains 16 memory sockets that are split into two sets of 8 sockets, one set per processor. Each 8-socket set is
organized into channels. In each channel, the release tabs of the first socket are marked white, the second socket black.
After working inside the system.
Installing and removing system components
77