Mini Perc Card Module; Removing Mini Perc Module - Dell EMC PowerEdge XE7420 Installation And Service Manual

2. Follow the procedure listed in the
Steps
1. Align and insert motherboard bridge board into the motherboard bridge module bracket.
2. Using the Phillips #2 screwdriver, secure the motherboard bridge board to the module bracket with a screw.
Figure 33. Installing the motherboard bridge board
Next steps
1. Install the sled cables kit.
2. Install the motherboard interposer module.
3. Install the motherboard bridge module.
4. Install all the cooling fans.
5. Install the mini PERC module.
6. Install the PCIe card module.
7. Install the air shroud.
8. Install the sled.
9. Follow the procedure listed in

Mini PERC card module

Removing mini PERC module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the sled.
4. Remove the air shroud.
5. Remove the PCIe card module.
66 Installing and removing system components
Before working inside your
After working inside your
Safety instructions.
Before working inside your
system.
system.
system.