Pcie Card Module; Removing The Pcie Card Module - Dell EMC PowerEdge XE7420 Installation And Service Manual

Figure 17. Installing a cooling fan
Next steps
1. Install the air shroud.
2. Install the sled.
3. Follow the procedure listed in

PCIe card module

Removing the PCIe card module

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in the
Steps
1. Pull the sled out of the enclosure.
2. Remove the four screws securing the PCIe card module.
3. Lift the PCIe card module from the system board.
After working inside your
Safety instructions.
Before working inside your
system.
system.
Installing and removing system components 51