Inside The System; Locating The Express Service Code And Service Tag - Dell EMC PowerEdge XE7420 Installation And Service Manual

Inside the system

Figure 2. Half width sled Inside the system
1. Sled cable kit
3. Memory sockets
5. System board
7. Mini PERC card module
9. M.2 riser card
11. Motherboard bridge board

Locating the Express Service Code and Service Tag

The unique Express Service Code and Service Tag are used to identify the system.
The information tag is located on the front of the system that includes system information such as Service Tag, Express Service
Code, Manufacture date, NIC, MAC address, QRL label, and so on. If you have opted for the secure default access to iDRAC,
the Information tag also contains the iDRAC secure default password. If you have opted for iDRAC Quick Sync 2, the
Information tag also contains the OpenManage Mobile (OMM) label, where administrators can configure, monitor, and
troubleshoot the PowerEdge servers.
Figure 3. Locating the Service Tag of your system
1. Information tag (top view)
2. Express Service Tag label
3. Information tag (bottom view)
4. Network MAC address information label
5. iDRAC MAC address information label
The Mini Enterprise Service Tag (MEST) label is located on the rear of the system that includes Service Tag (ST), Express
Service Code (Exp Svc Code), and Manufacture Date (Mfg. Date). The Exp Svc Code is used by Dell EMC to route support calls
to the appropriate personnel.
10 PowerEdge XE7420 overview
2. Cooling fans
4. CPU heat sink 1
6. CPU heat sink 2
8. PCIe card module
10. Motherboard interposer board