Moxa Technologies ioLogik E1200 Series User Manual page 9

ioLogik E1200 Series
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
Sampling Rate (all channels): 12 samples/sec
Input Impedance: 10M ohms (minimum)
Built-in Resistor for Current Input: 120 ohms
Power Requirements
Power Consumption: 121 mA @ 24 VDC
MTBF (meantime between failures)
Time: 474,053 hrs
Database: Telcordia (Bellcore)
ioLogik E1241
Analog Output
Resolution: 12 bits
Output Range: 0 to 10 VDC, 4 to 20 mA
Voltage Output: 10 mA (Max.)
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
Load Resistor:
• Internal power: 400 ohms
• External 24V power: 1000 ohms
Power Requirements
Power Consumption: 194 mA @ 24 VDC
MTBF (meantime between failures)
Time: 888,656 hrs
Database: Telcordia (Bellcore)
ioLogik E1242
Analog Input
Type: Differential input
Resolution: 16 bits
I/O Mode: Voltage / Current
Input Range: 0 to 10 VDC, 4 to 20 mA
Accuracy:
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
Sampling Rate (all channels): 12 samples/sec
Input Impedance: 10M ohms (minimum)
Built-in Resistor for Current Input: 120 ohms
Digital Input
Sensor Type: NPN, PNP, and Dry contact
I/O Mode: DI or Event Counter
Dry Contact:
• Logic 0: short to GND
• Logic 1: open
Wet Contact:
• Logic 0: 0 to 3 VDC
• Logic 1: 10 to 30 VDC (DI COM to DI)
Isolation: 3K VDC or 2K Vrms
1-5
Introduction