Peer-To-Peer Settings; Peer-To-Peer Settings (1-50); Sample Configuration - Moxa Technologies ioLogik E1200 Series User Manual

ioLogik E1200 Series

Peer-to-peer Settings

Peer-to-peer Settings (1-50)

The ioLogik E1200 supports up to 50 peer-to-peer mapping rules. You can configure the channel settings 10 at
a time. To enable the rules, either select the Enable All box to enable all 10 channels, or select the Enable box
individually for each rule. The Local Channel drop-down menu allows you to specify the channel of the ioLogik
E1200 to configure. Type the IP address and port number of a remote ioLogik E1200 in the Remote IP and
Remote Ports fields, respectively. The Remote Channel field is for you to select input channels of the remote
ioLogik E1200 when you select output channels in the Local Channel field. Set the Interval Time and On
change percentage on the local ioLogik E1200 that will trigger the transmission of a mapping signal to the
remote ioLogik E1200. The default local listen port number is 9020; this value can be set between 1 to 65535.
NOTE If you select a DI or AI channel in the Local Channel field, the Remote Channel field will be disabled. You need
to configure the DO or AO channel on the remote ioLogik E1200.

Sample Configuration

The following is an example of configuring DO (Server IP: 192.168.127.253) to DI (Client IP: 192.168.127.252)
peer-to-peer functionality with two ioLogik E1200 devices.
Server settings:
3-14
Using the Web Console