Date/Time; Language; Other - Labnet C0226R User Manual

Date/time

Setiing up time and date
Set date and time are still active even after restart of centrifuge.

Language

Changing menu language

Other

Rotor automatic identification
MENU/ CONFIGURATION /DATE/TIME
Press SET.
Via keys choose demanded value.
Press SET -
Via keys change choosen value.
Repeat above steps for other values.
Confirm by pressing SET.
Press BACK.
MENU / CONFIGURATION / LANGUAGE
Via
language
Mark it by pressing SET.
Press BACK.
MENU / CONFIGURATION / OTHER
Thanks to the AUTOMATIC IDENTIFICATION, the
centrifuge automatically identifies the rotor in the
chamber. Rotor identification is indicated by the
message.
When the function is deactivated, it is necessary to
manually select the desired rotor as described in
"6.5 Choosing rotors".
The AUTOMATIC IDENTIF. is turned on by default.
To enable the function:
Via keys choose
AUTOMATIC IDENTiF.
Press SET (
After rotor automatic correction
UPDATE! is visible
© 2018 Corning Incorporated
47
appears.
keys choose demanded menu
change to
ROTOR
).