Cycles History; Total Work Time - Labnet C0226R User Manual

From then on, access to the MENU is possible after entering the password.
In case of incorrect password, it will show message: ACCESS DENIED!
To delete the PASSWORD, "0000" must be set.
If the PASSWORD is forgotten, the emergency code "7654" should be used to clear password and
remove all locks.

Cycles history

Information concerning parameters of last 10
centrifuging cycles.

Total work time

Total working time of centrifuge
CONFURATION / LAST 10 CYCLES
Number of cycle can be changed by
keys.
The list can be scrolled using
To exit press BACK key.
CONFIGURATION / WORK TIME
In the CYCLES menu the following statistics
are displayed:
total working (centrifugation) time
working cycles counter
To exit press BACK key.
© 2018 Corning Incorporated
49
keys.