Labnet C0226R User Manual page 23

Switching between SPEED and RCF.
Switching between basic and simplified screens is described in 9.3 Main screen modes.
Exemplary change of TIME setting:
I
0 0 : 0 2 : 00
[hh : mm : ss]
e.g.:
centrifuging time – 2 minutes 00 seconds
On the screen appear an additional window,
in which:
Via keys mark field .
Press SET.
Change of screen mode will be active to
switch off the centrifuge
Press SET (to enter edit mode) -
appears.
Via
(highlighted).
Press SET -
With choose demanded value.
Via choose order of magnitude of
changing value (highlighted).
Repeat above two steps for other orders
of magnitude.
Confirm settings by pressing SET.
Exit edit mode by pressing BACK.
set value
current value (most significant digits)
© 2018 Corning Incorporated
23
keys mark TIME field
blinking.