Users Programs - Labnet C0226R User Manual

HOLD mode
Exemplary change of TEMP setting:

Users programs

Program choosing:
Simplified display mode
continuous run mode
To run centrifuging in HOLD mode set
00:00:00 time.
To end centrifuging in HOLD mode press
STOP.
Press SET (to enter edit mode) –
appears.
Via
(highlited).
Press SET key.
With choose demanded value.
Confirm settings by pressing SET.
Press BACK.
After switching centrifuge on, program that
was used in previous session is being loaded.
If any program was not used in previous
session, centrifuge resume the last choosen
parameters.
Press and hold
Choose PROG with
Press SET.
Execute points descripted follow
(below
description)
© 2018 Corning Incorporated
24
keys mark TEMP field
by 1 second.
Normal display mode