Short Mode - Labnet C0226R User Manual

Normal display mode
It is possible to set AUTOMATIC ROTOR IDENTIFICATION.
The procedure is described in subsection 9.8.

SHORT mode

The SHORT mode is activated by pressing and holding
In SHORT mode the centrifuge is working as long as the SHORT key is pressed
or when set time is over.
Press SET–
Via
Press SET (Rotor list will appear).
Via keys mark demanded rotor number
Confirm by press SET.
Press BACK.
With keys one may switch between
screens of rotors parameters
© 2018 Corning Incorporated
27
appears.
mark rotor choosing field.
SHORT MODE
(SHORT).