System Setup; Date & Time - Labnet MultiGene OptiMax Thermal Cycler Instruction Manual

12.0 System Setup

System Setup contains 8 functions:
1. Data Log: Contain the history of the latest-run Protocol.
2. Date & Time: Change the Date and Time settings.
3. Lid Temperature: Choose the preferred lid temperature as default setting during running a Protocol.
4. Beeper: Turn on/off the audible beep.
5. Administrator: Delete unwanted Usernames and their Protocols.
6. Service Mode: Reserved for Service engineers.
7. Ramping Speed: Choose the High Ramping Speed or Low Ramping Speed.
8. Tm Calculator: Press A, T, C, and G number of sequence, to get the Tm value.
SYSTEM
Data Log
Lid
Temperature
Beeper
Administrator
Service Mode
Ramping Speed
Press Enter or F1 to select your System.
SELECT
F 1
12.1 Date & Time
Users can change the date type, default date, and time of this unit by selecting Date & Time screen under SYSTEM screen. NOTE:
Remember to press F1:ACCEPT to store your settings.
SYSTEM>DATE&TIME
Data TYPE:
Default Date : 08/21/11
Default Time : 11:00:33
Press F1 to save your settings
F 2
2
(1. Y/M/D
ACCEPT
F 2
F 1
8/21/2022
F 3 F 4
8/21/2022
2.M/D/ 3.D/M/Y
F 3 F 4
11:00
EXIT
F 5
11:00
EXIT
F 5
Instruction Manual | 17