Password Protection - Labnet C0226R User Manual

Choice of temperature unit

Password protection

Setting up password
To prevent from an unauthorized use, a PASSWORD can be set.
Note: No PASSWORD is set by default.
The PASSWORD can be set as follows when the rotor is at a standstill.
When the PASSWORD is set, the Key sign is displayed in the CODE zone. It is also displayed in the main
menu (lower right corner of the screen).
MENU / CONFIGURATION / OTHER
The TEMPERATURE in °C is turned on by default.
To change the temperature unit:
Via keys select unit
Confirm by pressing SET.
Press the
Press SET-
With keys set the valid 1000s place of
the PASSWORD. e.g.: 1xxx. With
set correct value.
Repeat above steps for all places.
Press SET.
As a confirmation repeat instructions
described above.
© 2018 Corning Incorporated
48
MENU / PASSWORD
keys until PASSWORD.
appears.
keys