Rotor Choosing - Labnet C0226R User Manual

Creating a new program:
Changing parameters during centrifuging
There is a possibility to change parameters: SPEED, RCF, TIME, TEMP during centrifuging.
Such modifications inactivate currently running program. Modification during run is represented
by PRG – – symbol (instead of the program number).

Rotor choosing

Rotor choosing
Simplified display mode
Press SET key.
Via
(highlighted).)
Press SET key. List of programs is visible.
Press SET key- menu of program settings
will appear.
Choose NEW PROGRAM, and then press
demanded parameters of centrifuging
(look chapter 6. Centrifugation).
Press and hold
Choose rotor number
(exemplary 11199/-----) with
Press SET.
Execute points descripted follow (below
Normal display mode description)
© 2018 Corning Incorporated
26
keys mark PRG field
by 1 second.
.