Table of Contents
Advertisement
1-20
microLaser 320 and 401 Installation Guide
Selecting a Display Language
Selecting a Display Language
The default language for all LCD display messages and the Configuration Summary and Test Page is English.
You can change the default language to Espanol, Italiano, Deutsch or Francais.
NOTE:
The language that you select will be reflected on all LCD display messages, and also the content of
the Configuration Summary and Test Page.
To change the default language from English to one of the other four available selections:
From the Ready status, press MENU, the control panel display will read:
1.
2.
Press PREVIOUS or NEXT until the display reads:
3.
Press SELECT, the display will read:
4.
Press NEXT or PREVIOUS until the display reads:
5.
Press SELECT, the display will read:
6.
Press NEXT or PREVIOUS until the desired default language appears on the bottom line of the dis-
play:
7.
Press SELECT. You have now changed the default language.
Publication No. GEK-89496C
Menu
Paper
Menu
System Menu
System Menu
Factory Defaults
System Menu
Display Language
System Menu
English
Genicom
Jun 99
Advertisement
Table of Contents
Troubleshooting
