Table of Contents
Advertisement
Unpacking the Printer
1.
Cut the shipping straps off the exterior carton.
2.
Remove the four plastic inserts at the base of the shipping container by pulling on the tabs of each
insert. Plastic inserts should be completely removed.
3.
Lift the shipping carton up and away from the printer.
4.
Remove the plastic bag and any shipping tapes affixed to the printer.
Jun 99
microLaser 320 and 401 Installation Guide
Genicom
Space requirements
Publication No. GEK-89496C
1-5
Advertisement
Table of Contents
Troubleshooting
