Table of Contents
Advertisement
1-22
microLaser 320 and 401 Installation Guide
Printing a Configuration Summary
Printing a Configuration Summary
Your printer can print a configuration summary that lists the currently selected status of menu options, media
selections in trays, options installed and other relevant information about your printer. To print a Configura-
tion Summary, follow these steps:
1.
From the Ready status, press MENU, the control panel display will read:
2.
Press PREVIOUS or NEXT until the display reads:
3.
Press SELECT, the display will read:
4.
Press NEXT or PREVIOUS until the display reads:
5.
Press SELECT. A two page Configuration Summary will print. An example of a Configuration Sum-
mary appears on the following page.
NOTE:
Depending upon the options installed and menu settings, your Configuration Summary may vary.
Publication No. GEK-89496C
Menu
Paper
Menu
Functions
Functions
Reset Printer
Functions
Print Summary
Genicom
Jun 99
Advertisement
Table of Contents
Troubleshooting
