Welcome; Features - Genicom microLaser 320 Installation Manual

2 microLaser 320 and 401 Installation Guide

Features

Welcome

Thank you for selecting the GENICOM microLaser 320 or microLaser 401 laser printer. In this manual you
will find important information regarding operation and care of your printer. Please read this manual in its
entirety and keep it at hand for later reference.
Features
Your laser printer comes with the following features.
• High-speed and high-quality printing
microLaser 320 - output of paper at 32 pages per minute with a resolution of up to 1200 x 1200 dpi,
assuring razor-sharp output of graphics and text, even at very small point sizes.
microLaser 401 - output of paper at 40 pages per minute with a resolution of up to 1200 x 1200 dpi,
assuring razor-sharp output of graphics and text, even at very small point sizes.
• Flexible Paper Source and Delivery
The printer comes standard with two 500-sheet universal paper cassettes and the Multi- Bypass Feeder.
An optional 2500-sheet High Capacity Feeder (HCF), Envelope Feeder, and Duplexer can be installed.
On the paper output options, the printer allows for delivery to the Face Down Output Tray, Face-Up
Tray, Mailbox and Finisher/Stapler.
• Ergonomic operation
The easy-to-read display clearly shows the operation status of the printer. Ergonomically shaped
front-panel push-buttons are used to control all functions.
• User-friendly EP cartridge
The integrated EP cartridge contains both the toner and the photosensitive drum in a single housing,
which makes it easy to replace the cartridge.
• Continuous printing of up to 3550 sheets
The two standard paper cassettes hold about 500 sheets of paper each and the multi bypass feeder
holds 50 sheets. Trays 3, 4, and 5 in the optional HCF unit provide a total of 2500 sheets. Together
they allow continuous printing of up to 3550 sheets.
Publication No. GEK-89496C
Genicom
Jun 99